Plastics Industry Related

Product Description

Butyl acrylate is a colorless liquid with a sharp odor. It is readily miscible with most organic solvents. Butyl acrylate is primarily used as a reactive building block to produce coatings and inks,adhesives, sealants, textiles, plastics and elastomers. Butyl acrylate is used in the following applications: Adhesives – for use in construction and pressure-sensitive adhesives Chemical intermediates – for a variety of chemical products Coatings – for textiles and adhesives, and for surface and...

Specification Application 1. Polycondensation reaction with formaldehyde can produce melamine resin, which can be used in the plastics and coatings industry, and can also be used as an anti-wrinkle and anti-shrink treatment agent for textiles; used in the manufacture and processing of wooden building templates. 2. It can be used for sturdy, heat-resistant decorative boards, moisture-proof paper and gray leather tanning agents, adhesives for synthetic fireproof laminates, fixatives or hardeners...

SPECIFICATION Model NO. INTRINSIC VISCOSITY RANGE I.V. 0.8 - I.V. 1.30 Material Polybutylene Terephthalate/PBT Usage General Plastics, Engineering Plastics, Specialty Plastics Plastic Properties After Heated Thermoplastic Plastics Plastic Forming Method Injection Color White Trademark SUNRISE Origin China

General Description A clear colorless liquid. Toxic by inhalation and skin absorption. Corrosive to tissue. Flash point 136°F. May polymerize exothermically if heated or contaminated. If the polymerization takes place inside a container, the container may rupture violently. Vapors heavier than air. Used to make plastics. 【Product standards】

C12-14 fatty alcohol is a chemical substance with the molecular formula of C13H28O. Product use: Surfactants, synthetic detergents, wetting agents, and emulsifiers are the basic raw materials for the manufacture of ointment intermediates, textile and leather auxiliary materials, and lubricating grease additives. purity: 0.832g/cm3 boiling point: 272.1°C at 760 mmHg flash point: 121.1°C Vapor pressure: 0.000807mmHg at 25°C

Product Description Application As an important chemical industrial raw material and a good solvent, Dimethylformamide is mainly used in polyurethane, orlon, agricultural chemicals, dyes and electronic industries. As a washing firming agent in polyurethane industry, Dimethylformamide is mainly used to produce synthetic leather; As a synthetic medicine intermediate in medicine industry, Dimethylformamide is widely used to produce doxycycline, cortisone and sulfa; As a solvent in orlon industry,...

Isopropyl acetate is an ester, an organic compound that is the product of the esterification of acetic acid and isopropanol. It is a clear, colorless liquid with a characteristic fruity odor. Isopropyl acetate is a solvent with a wide variety of manufacturing uses that is miscible with most other organic solvents, and moderately soluble in water. It is used as a solvent for cellulose, plastics, oil, and fats. It is a component of some printing inks and perfumes. Isopropyl acetate decomposes...

Product name: N, N-Dimethylacetamide Molecular formula: C4H9NO Molecular weight: 87.12 CAS number: 127-19-5 Specification: Quality Certificate ISO9001:2008 -Quality Management System; SGS certification; FDA certification Package & Storage: 190KG/drum , 15.2MT/20FCL. Also, it can be packed according to customers' needs. Store closed containers in a cool, dry, well-ventilated area. Avoid exposure to direct sunlight. Applications: Used as raw material for synthetic fiber and excellent polar...

Cyclohexanone is a colorless, clear liquid with a soil smell; its impure product appears a light yellow color. It is miscible with several other solvents. easily soluble in ethanol and ether. The lower exposure limit is 1.1% and the upper exposure limit is 9.4%. Cyclohexanone may be incompatible with oxidizers and nitric acid. Cyclohexanone is primarily used in industry, up to 96%, as a chemical intermediate in the production of nylons 6 and 66. Oxidation or conversion of cyclohexanone yields...

n-Butyl acetate, also known as butyl ethanoate, is an ester that is a colorless, flammable liquid at room temperature. It is found in many types of fruit, where along with other chemicals, it imparts characteristic flavors and has a sweet smell of banana or apple. It is used as a synthetic fruit flavoring in foods such as candy, ice cream, cheeses, and baked goods. Butyl acetate is often used as a high-boiling solvent of moderate polarity. It is also used as a solvent in nail polish along with...

Ethyl acetate (systematically ethyl ethanoate, commonly abbreviated EtOAc, ETAC, or EA) is the organic compound with the formula CH3−COO−CH2−CH3, simplified to C4H8O2. This colorless liquid has a characteristic sweet smell (similar to pear drops) and is used in glues, nail polish removers, and the decaffeination process of tea and coffee. Ethyl acetate is the ester of ethanol and acetic acid; it is manufactured on a large scale for use as an organic solvent. CAS No.: 141-78-6 Other Names:...

Sebacic acid is also called n-decanedioicacid, 1,10-decanedioic acid, 1,8-octanedicarboxyli cacid, Sebacicacid. Sebacic acid belongs to aliphatic dibasic acid, which exists in flue-cured tobacco leaves, burley tobacco leaves and oriental tobacco leaves. Sebacic acid is white flake crystal at room temperature, and the industrial product is slightly yellow. Slightly soluble in water, hardly soluble in benzene, petroleum ether, carbon tetrachloride, easily soluble in ethanol and ether. Sebacic...

Cyclohexanone is a colorless, clear liquid with a soil smell; its impure product appears a light yellow color. It is miscible with several other solvents. easily soluble in ethanol and ether. The lower exposure limit is 1.1% and the upper exposure limit is 9.4%. Cyclohexanone may be incompatible with oxidizers and nitric acid. Cyclohexanone is primarily used in the chemical industry, especially plastics industry related, up to 96%, as a chemical intermediate in the production of nylons 6 and...

Cyclohexanone is a colorless, clear liquid with soil smell; its impure product appears as light yellow color. It is miscible with several other solvents. easily soluble in ethanol and ether. The lower exposure limit is 1.1% and the upper exposure limit is 9.4%. Cyclohexanone may be incompatible with oxidizers and nitric acid. Cyclohexanone is a primarily used in industry, up to 96%, as a chemical intermediate in the production of nylons 6 and 66. Oxidation or conversion of cyclohexanone yields...

CAS No.: 73513-42-5 Other Names: 2-Methylpentane MF: C6H14 Type: Syntheses Material Intermediates Purity:99% Application: Solvent Appearance: Colorless transparent liquid Product name: 2-Methylpentane CAS: 107-83-5 Chemical formula: C6H14 Molecular weight: 86.175 Melting point: -154 ℃ Density: 0.7 g/cm³ Flashpoint: -23.3 ℃ Saturated vapor pressure: 23kpa(20℃) Upper explosion limit% (V/V): 7.0% Lower explosion limit% (V/V): 1.2% Solubility: Insoluble in water, soluble in ethanol, ether, benzene,...

Specification Isopropanol is an important intermediate in the production of pesticides. It can produce fungicides such as imidacloprid and isopyricularin, insecticides and acaricides such as amiprofyl, parathion, isosaliphos methyl, propoxur, fenvalerate, and herbicide isopropyl. It can also prepare bromoisopropane and chloroisopropane. It is also an important intermediate of pesticides.

Additives, Modifiers, and Reinforcing Agents: Additives – UV stability, easy release (mold releases), colorants, and other stability additives Modifiers – Flame retardants, impact modifiers, flow enhancers Reinforcing Agents – Glass fibers, mineral fillers It has a low friction coefficient, high heat resistance, toughness, fatigue resistance, self-lubrication, and weather resistance.

Specification Application 1. Polycondensation reaction with formaldehyde can produce melamine resin, which can be used in the plastics and coatings industry, and can also be used as an anti-wrinkle and anti-shrink treatment agent for textiles; used in the manufacture and processing of wooden building templates. 2. It can be used for sturdy, heat-resistant decorative boards, moisture-proof paper and gray leather tanning agents, adhesives for synthetic fireproof laminates, fixatives or hardeners...

Acrylic acid undergoes the typical reactions of a carboxylic acid and, when reacted with an alcohol, it will form the corresponding ester. The esters and salts of acrylic acid are collectively known as acrylates (or propenoates). The most common alkyl esters of acrylic acid are methyl-, butyl-, ethyl-, and 2-ethylhexyl-acrylate. Acrylic acid and its esters readily combine with themselves (to form polyacrylic acid) or other monomers (e.g. acrylamides, acrylonitrile, vinyl, styrene, and...